Building Assessment Process-1-Free-Samples-Myassignmenthelp.com

Questions: 1.Identify the relevant building, planning, occupational health and safety requirements and environmental legislative requirements and explain how they interact and how these would be applied to the construction of a class 1a dwelling. 2.Explain the building permit application process in Victoria. 3.What is the role of a building surveyor both private and municipal. ? 4.Identify which regulation under Part 4 of the Building Regulations 2006 relates to this matter and identify if it complies. Explain your answer. 5.In your own words explain the performance solution process applied where a building solution does not meet the deemed to satisfy provisions of the BCA. Answers: 1.Building code of Australia (BCA) defines class 1a dwelling as one or more structures with a single dwelling for private residential dwellings. Building code of Australia aims at ensuring buildings is build to a standard for a specific use. Occupational health and safety is a unit dealing with safety, health and workers welfare. It is important in workplace to help in minimizing injuries or death (Robson et.al, 2007). Some of the requirements in this unit include health and safety management which devices methods to reduce cases of injury and illness at work place. These methods differ depending on place and type of work done. In order for this system to work, the manager of a company should train its workers on the need to maintain health and safety. Another health and safety requirement is hazard assessment and control; this forms a basis of occupational health and safety because it involves careful analysis of what could cause danger to workers at the work place hence preventing injuries and/or illness. For this case of construction, the manager should assess the work site in case it has any health hazards and thereafter come up with findings which can then be shared with the workers. The hazards could be physical, chemical, psychosocial or biological. Work site inspections is also a health and safety measure, work place should be inspected always by supervisor and workers. It involves checking the workplace to identify hazards and then eliminating them if possible. Incident management and investigation is also another form of health and safety requirement. This involves finding out the cause if an accident in the work place incase a worker has been injured and finding good measures to prevent similar cases from happening. To ensure good health and safety, Workers competency and training should also be taken into consideration. Workers should be competent in what they do and should have good training on how to operate machineries and know all safety measures. In a case where they are exposed to danger, the manger should find a way of eliminating the dangers to avoid risking workers life (Lingard Rowlinson, 2005). Emergency response and first aid, this is another requirement of health and safety. The work place should have an emergency response where in case of a problem or fire, the workers have an exit site to evade danger. In case of danger there should be first aid kits to offer first help before proceeding to health centre in case the injury is serious. When planning to erect a building, environmental legislative requirements are also taken into consideration and they include; environmental protection act which defines the level of contamination on a land to be used in erecting a building, it includes an idea that there can be a possibility of harm caused by contamination and therefore thorough investigations should be done(Fergusson Langford,2006). Environmental impact Assessment is a very crucial tool in assessing the impact of development projects and finding out ways to reduce future impacts. This is expensive and time consuming. Hazardous waste regulation which states that waste which is hazardous should be separated and removed for disposal at the correct place. Water resource act states that it is an offence to dispose waste to water bodies knowingly. This can occur through surface flow or through infiltration (Zhao, et.al, 2012). Therefore when planning to build a structure, waste disposal should be considered. 2.Building permit is a document giving authority to build and before applying it, a building surveyor is required .After getting a surveyor, you now apply for the permit and make payments, submit drawings, allotment allocation (Heijden, 2008). Thereafter it is checked for compliance under act and regulations and then makes a decision to issue permit with or without conditions. 3.Building surveyor is trained person with a great and deep knowledge of building control processes. There are two types; private and municipal building surveyor.Private building surveyor is a person who does his privately, while municipal surveyor works under local government or council. The roles of a building surveyor include issuing building permit, carry out inspections of buildings and work done and also issue occupancy permit. They show their competent skills by assessing and evaluation work plans (Chan Chan, 2005). Building surveyor ensures that all documents from all authorities are obtained. They also do the inspection work to buildings under construction to ensure that act regulations and BCA are adhered to. 4.Building close to a neighbors property may require that the building surveyor takes care of the other persons property and an insurance cover should be obtained before starting the work. According to part 4 of buildings Regulations 2006, changes have been made to minimum setback and the standards for average height for walls which doesnt need planning permit. Average height should be increased and maximum height unchanged. In this case where the boundary exceeds the boundary wall heights, the neighbors should be notified as per requirements. 5.In the case building fails to meet the requirements, an alternative solution is accurately presented the correct procedures followed (Baker Gleeson, 2006). If the alternative solution is based on material to be used or construction idea, a compliance certificate which was issued earlier issued is still acceptable. In the case where the design isnt as required, the alternative one is compared with the one which is accepted so as to achieve the required result. If in the case of a requirement which can be measured, a computer can be used to find out if requirements are met as per performance. Design and analysis documents of the alternative solution can be submitted for recording purposes to show that the requirements have been met, making approval process of alternative solution faster. References Baker, D. C., Sipe, N. G., Gleeson, B. J. (2006). Performance-based planning: perspectives from the United States, Australia, and New Zealand.Journal of Planning Education and Research,25(4), 396-409. Chan, A. T., Chan, E. H. (2005). Impact of perceived leadership styles on work outcomes: Case of building professionals.Journal of Construction Engineering and Management,131(4), 413-422. Fergusson, H., Langford, D. A. (2006). Strategies for managing environmental issues in construction organizations.Engineering, Construction and Architectural Management,13(2), 171-185. Heijden, J. . (2008).Competitive enforcement: Comparative analysis of Australian building regulatory enforcement regimes. Amsterdam: IOS Press. Lingard, H., Rowlinson, S. M. (2005).Occupational health and safety in construction project management. Taylor Francis. Top of Form Royal Institution of Chartered Surveyors. (2000).Appointing a building surveyor. London: RICS. Bottom of Form Robson, L. S., Clarke, J. A., Cullen, K., Bielecky, A., Severin, C., Bigelow, P. L. ... Mahood, Q. (2007). The effectiveness of occupational health and safety management system interventions: a systematic review.Safety Science,45(3), 329-353. Zhao, Z. Y., Zhao, X. J., Davidson, K., Zuo, J. (2012). A corporate social responsibility indicator system for construction enterprises.Journal of cleaner production,29, 277-289